Accton-technology CheetahAccess Wireless Gateway AC-IG2004W Bedienungsanleitung PDF herunterladen (Seite 20)

Installation

2-8

Note: When connecting to the WAN port, use 100-ohm Category 3, 4 or 5 shielded or

unshielded twisted-pair cable with RJ-45 connectors at both ends for all

connections.

Connect the CheetahAccess

™ Wireless Gateway to a Printer

If you connect a printer to the CheetahAccess Wireless Gateway, all the computer

users connected to your LAN can have access to the printer. Connect a standard

parallel printer cable to the Printer port on the CheetahAccess Wireless Gateway,

and configure the printer server as described on page 6-1.

Connecting the Power Adapter

Plug the power adapter into the power socket on the CheetahAccess Wireless

Gateway, and the other end into a power outlet. Check the indicator marked Power

on the front panel to be sure it is on. If the power i

ndicator does not light up, refer to

Troubleshooting in Appendix A

Verify Port Status

Check the power and port indicators as shown in the following table

LED Condition Status

Power

(Green)

On CheetahAccess Wireless Gateway is receiving power.

WLAN

(Green)

The CheetahAccess Wireless Gateway has

established a valid

wireless connection

WAN

(Green)

On The WAN port has established a valid network connection.

LAN

Link

(Green)

On The indicated LAN port has established a valid network

connection.

Activity

(Amber)

Flashing The indicated LAN port is transmitting or receiving traffic.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 73 74

Keine Kommentare

Accton-technology CheetahAccess Wireless Gateway AC-IG2004W Bedienungsanleitung Seite 20